Preventative Maintenance

Wheel Alignment Inspection Program

Wheel Alignment Inspection Program

  • Inspect all heads and clean inspect all cables and clean
  • Check operating system and software integrity
  • Check all heads on calibration bar perform calibration if needed
  • Check castor sweep and observe test alignment
  • Check turn plates and adjust if needed

 

Bi Annually: $699.00

Brake Lathe Equipment

Brake Lathe Equipment

  • Inspect all moving parts
  • Clean out metal shavings
  • Change oil
  • Inspect belt
  • Check on/off switch
  • Check power cord
  • Check arbor and cones
  • Check rotor cutting attachment

 

Bi Annually: $299

Inspect shaft threads for wear

Inspect shaft threads for wear

  • inspect all cones for wear
  • check wing nut for proper operation (quick connect if applies)
  • check all electronics
  • check motor amperes
  • check belt if applies
  • check fan motor if applies
  • check touch pad if applies
  • check calibration accuracy

 

Yearly: $99.95

Tire Changer Equipment

Tire Changer Equipment

  • inspect all hoses
  • inspect oil/water separator
  • check complete system operation
  • clean entire machine
  • add air tool oil, if needed, and adjust
  • check bead blast
  • check bead breaker assembly
  • check turntable reversing switch
  • check motor amperes
  • check bead break tools
  • check air motor if applicable
  • check air fill chuck
  • check gauges

 

Bi Annually: $499