Diagnostic Tools

Features and Benefits:

• Troubleshoots tractor trailer circuits
• One person can now test all the lighting
• Allows bypassing of troubled circuitry while on the road
• Eliminates guesswork
• Packaged with an extra jumper connector

The 7 round pin trailer tester identifies faulty circuit on trucks and trailers by attaching to the wire terminals Plugs in line to the trailer to allow the truck to power the trailer while you test each circuit. Also has an emergency bypass feature which allows the user to remove the pin on the faulty circuit and jump power from the 12 volt supply for a temporary fix.

Features and Benefits

• Top-of-the line timing light for the selective do-it-yourselfer
• Split-screen digital LCD readout
• One handed operation with slim, rotating barrel
• Detachable leads, metal inductive pickup
• Patented Skip Circuitry Test up to 9,990 RPM

The INNOVA® Timing Lights include a full range of options designed to meet the needs of DIYers with many of the features that professional installers demand. Their wide coverage, proven quality and competitive price make them the tool of choice for use on the vehicles of today and tomorrow. Split-screen digital LCD readout displays Tachometer and Advance functions simultaneously (Digital Tach: 249 to 9,990 RPM; Digital Advance: 0° to 90°). Slim, rotating barrel for better aim at timing mark. Detachable leads, metal inductive pickup. Protective Hand Guard. Patented Skip Circuitry Test up to 9,990 RPM. One-hand Operation.

Features and Benefits:

• Instantly power up, and ground, components with the press of a switch.
• Find bad grounds, test polarity, and check continuity.
• The easy to read back-lit voltmeter reads voltage in 1/10th volt increments from 1/10th of a volt up to 70v.
• The PPLS01 Gold Series Lead Set:
• Two self centering piercing probes handle wires from 28-8awg.
• Stack-able 1, 3 6 ft leads enable you to customize your leads from 1-10ft.
• Compatible with both the PP319 and the ECT2000.

Features and Benefits

• Magnetic back allows for mounting to steel surfaces
• Retractable test leads pull out and stay at desired length
• Rewind test leads when not in use
• 18-gauge copper wire
• Different colored wires for easy identification

Features and Benefits:

• Provides direction and distance to shorts in a vehicle cable
• Tests motors, loads, lights, relays, sensors, fuses, wires & circuits
• Determines circuit polarity
• Determines system voltages for testing and bad ground indication
• Helps locate open circuits

The PPKIT03S combines the power of the Power Probe III & PPLS01 with the ECT3000 to quickly troubleshoot and diagnose circuit conditions. Save time by not tearing up wire harnesses, panels, carpets, and more to locate open or shorted circuits.

Features and Benefits:

• Supplies Power and Ground for Functional Component Testing
• Fuel Injector tester for easy circuit diagnosis
• Signal Distance indicator bar
• 10 minute auto shut off
• Large Color LCD Screen with Easy to Navigate User Menu

The Power Probe 4 Master Combo Kit combines the Power Probe 4, PPECT3000 and accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities. The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors. Also, like all Power Probe circuit-testers, it supplies Power and Ground for functional component testing on or off the vehicle.

Features and Benefits:

• Digital voltmeter with min/max voltage capturing
• 4mm banana jack
• 20 ft power lead
• Tests for bad grounds and continuity
• Supplies power and ground

The Power Probe III Circuit tester (Red) with the ability to supply Power or Ground with an indicator tone and bright-white LED headlamps. Features Digital Voltmeter, Min/Max, Audible Circuit Monitoring, 4mm Standard Banana Jack and Auxiliary Ground for component testing. Works with 12 - 24 VDC Systems.

Includes: Power Probe III (with probe tip and battery cable clip set) and instructional video.

Features and Benefits

• Power Up Components
• Audio Tone
• Voltmeter
• 12 - 24 Volt Range
• 20ft. Jumper Lead Set
• Bad Ground Indicator
• Continuity Tester
• Short Circuit Indicator
• Relay and Component Tester

The 20ft. lead will allow you to test bumper-to-bumper without jumper leads. Audio tone indicates positive with a high pitched tone and negative with a low pitched tone. The audio feature can be disabled when testing relays. The Power Probe III has 2 cool white LEDs that flood the work area with bright light. The housing is sleek and feels great in your hand.

Includes:

Power Probe 3 (with probe tip and battery cable clip set)

20 Foot Extension Lead Cable

Cigarette Lighter Adapter

Instruction Manual

Carrying Case

Features and Benefits:Intelligent Optical Positioning System for Autel Standard Calibration Frame;Includes 6 Hi-res Cameras, Wheel Clamps, Targets, and Power Supply;Complete ADAS Calibration Frame Positioning in as Little as 1 Minute;Do Away with Mechanical Measurements;Significantly Reduce Setup Time and Increase Positioning Accuracy;Ideal for Collision Repair, Glass Replacement, and Repair Shops;Fast, Accurate, and Infinitely Repeatable;Check Alignment Tolerances Prior to Calibration;One-year Limited Warranty;The MaxiSys IA800 Intelligent ADAS Calibration Tool enables frame placement in as little as 1 minute to make your ADAS calibrations faster, more accurate, and endlessly repeatable. This professional Optical Positioning System for the Autel Standard Calibration Frame includes 6 high-resolution cameras, wheel clamps, and targets.

Features and Benefits:

• Portable ADAS Calibration System
• Perform Vehicle LDW Camera Calibrations
• Collapsible Aluminum Calibration Frame
• Includes 2-Line Centering and 5-Line Alignment Lasers
• Includes LDW Targets for Numerous Vehicle Manufacturers

Autel’s MA600 Portable ADAS Calibration system includes a collapsible aluminum calibration frame, 2-line and 5-line centering and aligning lasers, laser-assisted reflectors and Lane Departure Warning (LDW) calibration target set for the calibration of vehicle camera systems. The MA600 is compatible with the MaxiSYS ADAS tablet, or the MaxiSYS MS906BT or higher tablet series when upgraded with ADAS software (purchased separately).

Features and Benefits:

• Use on 7-Spade Equipped Vehicles with Integrated and Aftermarket Brake Controllers
• Quickly troubleshoot electrical circuits and ground condition
• Brake Force Meter displays real-time, brake controller output gain and timing
• Microprocessor controlled; simulates trailer brake loads
• 25 ft. cable allows one-man, in-cab testing of brake controller and all truck-side tow circuits, e.g. tail lights, turn signals, electric brakes, etc.

Includes: Electric Brake Force Meter, 25-ft Cable and Soft, Nylon Carrying Case

The #9107A Electric Brake Force Meter with Dynamic Load Simulation and Circuit Testing is a professional, High-quality tool that allows you to test the electric brake controller output and all tow-lighting functions without a trailer present. The #9107A supersedes the #9107 and includes 2017 updates.

Features and Benefits

• Power Up Components
• Audio Tone
• Voltmeter
• 12 - 24 Volt Range
• 20ft. Jumper Lead Set
• Bad Ground Indicator
• Continuity Tester
• Short Circuit Indicator
• Relay and Component Tester

The 20ft. lead will allow you to test bumper-to-bumper without jumper leads. Audio tone indicates positive with a high pitched tone and negative with a low pitched tone. The audio feature can be disabled when testing relays. The Power Probe III has 2 cool white LEDs that flood the work area with bright light. The housing is sleek and feels great in your hand.

Includes:

Power Probe 3 (with probe tip and battery cable clipset)

20 Foot Extension Lead Cable

Cigarette Lighter Adapter

Instruction Manual

Carrying Case

Power Probe TEK III Test Light and-Voltmeter, Blue